Microcylinders are the most widespread linear actuators in common use due to their reduced dimensions. They can be applied
in the most varied of sectors, from packaging to textiles, from woodworking machines to the ceramic sector and so on.
Starting from these premises we have designed a light and sturdy component of pleasing appearance realized in three version:
with threaded end covers, rolled end covers and rolled end covers with all components stainless steel.
Threaded end covers version: hard anodized aluminium end covers, threaded into the anodized aluminium barrel. Bores
from diameter 8 to 25mm. are made according to ISO 6432, while the diameters 32, 40 and 50 out of norms are produced to
complete the range.
Starting from this base, we have derived the special designs which we are describing herebelow:
single-acting with front or rear spring (max. stroke 40 mm; for longer strokes the length increase is not proportional to
the stroke in order to provide lodging for the spring);
double and single-acting with flat bottom instead of clevis;
push-pull rod;
hexagonal non-rotating rod;
stainless steel rod on all versions;
THERBAN seals on all versions for high temperature operations (120°C max);
microcylinders with magnetic piston (from Ø 10 to Ø 50)